九游会下载

接待进入西方神龙官方!
010-60693225

产物展现

高压巡检



      高压消防水泵巡检节制装备
      高压水泵巡检节制装备,普通利用在接纳高压机电驱动的水泵巡检进程中。 跟着我国产业程度的疾速成长,一些大型企业消防泵站大多选用了6-10KV的中压机电作为水泵的驱动能源。是以,对大功率、高电压的电念头,装备公用的高压启动装备----高压巡检柜 ,成了一种需要。北京西方神龙环保装备制作无限公司对高压机电水泵节制与主动巡检体系,已具备成熟靠得住的计划和出产才能,并获得高压接洽柜查验报告协调波查验报告。高压巡检柜保障持久处于非运转状况的消防水泵获得平常巡检保护,确保消防水泵的靠得住运转。
      今朝,我公司在高压消防泵联动节制柜接纳接纳带储能式的高压真空断路器配合KYN28柜完成高压消防泵的联动节制,既能够完成各类长途启泵,也可完成当场启泵同时还能知足GB50974-2014中消防机器应急启泵的请求。

      出产制作根据规范及规范:
      GB50974- 2014《消防给水及消火栓体系手艺规范》条则“11节制与操纵”之划定,
      GB16927.1-1997《高电压实验手艺 第一局部:一 般试输请求》;

      GB3906 2006 3.6- 40 .5KV金属封锁开关装备和节制装备》;

      GB/T11022- 1999《高压开关装备和节制没备规范的配合手艺请求》;

      IEC60694: 1996《高压开关装备和节制装备的通用手艺请求》。


      High pressure fire pump inspection control equipment

      High pressure water pump inspection control equipment is generally used in the inspection process of water pump driven by high pressure motor. With the rapid development of China's industrial level, most of the fire pump stations in some large enterprises choose 6-10KV medium voltage motor as the driving power of the pump. Therefore, for high-power, high-voltage motors, equipped with special high-voltage starting equipment - high-voltage inspection cabinet, has become a demand. Beijing Dongfang Shenlong environmental protection equipment manufacturing Co., Ltd. has a mature and reliable scheme and production capacity for the control and automatic inspection system of high-voltage motor water pump, and has obtained the inspection report of high-voltage contact cabinet and harmonic inspection report. The high-pressure inspection cabinet ensures the daily inspection and maintenance of the fire pump in the non operating state for a long time, and ensures the reliable operation of the fire pump.

     At present, our company adopts high-pressure vacuum circuit breaker with energy storage type and kyn28 cabinet to realize the linkage control of high-pressure fire pump in the linkage control cabinet of high-pressure fire pump, which can not only realize the remote start of various pumps, but also realize the local start of pumps and meet the requirements of emergency start of fire engines in gb50974-2014.



     Production and manufacturing standards and specifications:

Article "11 control and operation" of GB50974-2014 technical code for fire water supply and hydrant system,

Gb16927.1-1997 high voltage test technology Part 1: General test requirements;



GB3906 2006 3.6-40.5KV metal enclosed switchgear and control equipment;



GB / t11022-1999 common technical requirements of standards for high voltage switchgear and control equipment;



Iec60694: 1996 general technical requirements for high voltage switchgear and control equipment.